PERC Photovoltaic Panels
TOPCon solar modules are available in a wide range of power outputs—from 410 W through 705 W, including specific options like 410–440 W, 460–490 W, and 605–635 W models.
High Efficiency 182mm Half Cut
590W 600W 605W Mono PERC Solar Module
PERC (Passivated Emitter and Rear Cell) panels are an enhanced type of monocrystalline solar module that add a special passivation layer on the back of the solar cell. This layer reflects unused light back into the cell, allowing it to generate more electricity from the same sunlight. PERC technology improves efficiency (around 20–22%), delivers better performance in low-light and high-temperature conditions, and is widely used for both residential and commercial solar systems due to its balance of cost-effectiveness and reliability.
Advatnages
Wide Capacity Range – Available in 575 W to 605 W options, offering high output for both commercial and utility-scale projects.
Higher Conversion Efficiency – Mono PERC technology with 182 mm half-cut cells delivers efficiency up to 21.65%, ensuring greater energy generation per module.
Bifacial Options – Certain HiMAX models are available with bifacial designs, enabling additional power gain from the rear side and improving total system yield.
Improved Performance in All Conditions – Half-cut cell design enhances performance under low-light conditions and maintains stable output even in high-temperature climates.
Reduced Hotspot Risk – Lower operating current (~11 A) and optimized cell layout minimize hotspot formation, extending module lifespan and reliability.
Space Optimization – Compact design with higher wattage per panel makes them ideal for rooftop projects and areas with limited installation space, reducing overall system footprint.
Long-Term Reliability – Supported by Sunpal’s 25-year product warranty and 30-year linear power warranty for consistent performance.
| No. of Cells | 156 (6×26) |
| Dimensions | 2465 × 1134 × 35mm |
| Weight | 30.5kg |
| Junction Box | Ip68 rated (3 bypass diodes) |
| Packaging | 31pcs/pallet 496pcs/40’HQ |
| Module Type | 575 | 580 | 585 | 590 | 595 | 600 | 605 |
| Maximum power (Pmax/W) | 575 | 580 | 585 | 590 | 595 | 600 | 605 |
| Open Circuit Voltage (Voc/V) | 53.43 | 53.53 | 53.63 | 53.73 | 53.83 | 53.93 | 54.03 |
| Short Circuit Current (Isc/A) | 13.69 | 13.76 | 13.83 | 13.90 | 13.97 | 14.04 | 14.11 |
| Voltage at Maximum power (Vmpp/V) | 44.22 | 44.32 | 44.42 | 44.52 | 44.62 | 44.72 | 44.82 |
| Current at Maximum Power (Imp/A) | 13.01 | 13.09 | 13.17 | 13.26 | 13.34 | 13.42 | 13.5 |
| Module Efficiency(%) | 20.58 | 20.75 | 21.93 | 21.11 | 21.29 | 21.47 | 21.65 |
| Maximum Power (Pmax/W) | 428 | 432 | 436 | 440 | 444 | 448 | 452 |
| Open Circuit Voltage (Voc/V) | 50.43 | 50.53 | 50.63 | 50.73 | 50.83 | 50.93 | 51.03 |
| Short Circuit Current (lsc/A) | 11.06 | 11.12 | 11.18 | 11.24 | 11.3 | 11.36 | 11.42 |
| Optimum Operating Voltage (Vmp/V) | 41.14 | 41.31 | 41.48 | 41.65 | 41.82 | 41.99 | 42.16 |
| Optimum Operating Current (Imp/A) | 10.41 | 10.46 | 10.52 | 10.57 | 10.62 | 10.67 | 10.73 |
Monofacial 680W 690W 700W PERC PV Module
PERC (Passivated Emitter and Rear Cell) panels are an enhanced type of monocrystalline solar module that add a special passivation layer on the back of the solar cell. This layer reflects unused light back into the cell, allowing it to generate more electricity from the same sunlight. PERC technology improves efficiency (around 20–22%), delivers better performance in low-light and high-temperature conditions, and is widely used for both residential and commercial solar systems due to its balance of cost-effectiveness and reliability.
Advatnages
Wide Capacity Range – Available in 575 W to 605 W options, offering high output for both commercial and utility-scale projects.
Higher Conversion Efficiency – Mono PERC technology with 182 mm half-cut cells delivers efficiency up to 21.65%, ensuring greater energy generation per module.
Bifacial Options – Certain HiMAX models are available with bifacial designs, enabling additional power gain from the rear side and improving total system yield.
Improved Performance in All Conditions – Half-cut cell design enhances performance under low-light conditions and maintains stable output even in high-temperature climates.
Reduced Hotspot Risk – Lower operating current (~11 A) and optimized cell layout minimize hotspot formation, extending module lifespan and reliability.
Space Optimization – Compact design with higher wattage per panel makes them ideal for rooftop projects and areas with limited installation space, reducing overall system footprint.
Long-Term Reliability – Supported by Sunpal’s 25-year product warranty and 30-year linear power warranty for consistent performance.
| No. of Cells | 132 (6×22) |
| Dimensions | 2384 × 1303 × 35mm |
| Weight | 33.6kg |
| Junction Box | Ip68 rated (3 bypass diodes) |
| Packaging | 31pcs/pallet 558pcs/40’HQ |
| Module Type | 675 | 680 | 685 | 690 | 695 | 700 |
| Maximum power (Pmax/W) | 675 | 680 | 685 | 690 | 695 | 700 |
| Open Circuit Voltage (Voc/V) | 46.3 | 46.5 | 46.7 | 46.9 | 47.1 | 47.3 |
| Short Circuit Current (Isc/A) | 18.68 | 18.73 | 18.78 | 18.83 | 18.88 | 18.93 |
| Voltage at Maximum power (Vmpp/V) | 38.4 | 38.6 | 38.8 | 39 | 39.2 | 39.4 |
| Current at Maximum Power (Imp/A) | 17.58 | 17.62 | 17.66 | 17.7 | 17.73 | 17.77 |
| Module Efficiency(%) | 21.73 | 21.9 | 22.06 | 22.22 | 22.38 | 22.54 |
| Maximum Power (Pmax/W) | 512 | 516 | 520 | 524 | 528 | 532 |
| Open Circuit Voltage (Voc/V) | 43.6 | 43.8 | 44 | 44.2 | 44.4 | 44.6 |
| Short Circuit Current (lsc/A) | 15.05 | 15.09 | 15.13 | 15.17 | 15.21 | 15.25 |
| Optimum Operating Voltage (Vmp/V) | 35.9 | 36.1 | 36.3 | 36.5 | 36.7 | 36.9 |
| Optimum Operating Current (Imp/A) | 14.27 | 14.3 | 14.33 | 14.36 | 14.39 | 14.26 |
Perc Bifacial 590W 600W 605W Solar Panel
PERC (Passivated Emitter and Rear Cell) panels are an enhanced type of monocrystalline solar module that add a special passivation layer on the back of the solar cell. This layer reflects unused light back into the cell, allowing it to generate more electricity from the same sunlight. PERC technology improves efficiency (around 20–22%), delivers better performance in low-light and high-temperature conditions, and is widely used for both residential and commercial solar systems due to its balance of cost-effectiveness and reliability.
Advatnages
Wide Capacity Range – Available in 575 W to 605 W options, offering high output for both commercial and utility-scale projects.
Higher Conversion Efficiency – Mono PERC technology with 182 mm half-cut cells delivers efficiency up to 21.65%, ensuring greater energy generation per module.
Bifacial Options – Certain HiMAX models are available with bifacial designs, enabling additional power gain from the rear side and improving total system yield.
Improved Performance in All Conditions – Half-cut cell design enhances performance under low-light conditions and maintains stable output even in high-temperature climates.
Reduced Hotspot Risk – Lower operating current (~11 A) and optimized cell layout minimize hotspot formation, extending module lifespan and reliability.
Space Optimization – Compact design with higher wattage per panel makes them ideal for rooftop projects and areas with limited installation space, reducing overall system footprint.
Long-Term Reliability – Supported by Sunpal’s 25-year product warranty and 30-year linear power warranty for consistent performance.
| No. of Cells | 156 (6×26) |
| Dimensions | 2465 × 1134 × 35mm |
| Weight | 32.1kg |
| Junction Box | Ip68 rated (3 bypass diodes) |
| Packaging | 31pcs/pallet 496pcs/40’HQ |
| Module Type | 575 | 580 | 585 | 590 | 595 | 600 | 605 |
| Maximum power (Pmax/W) | 575 | 580 | 585 | 590 | 595 | 600 | 605 |
| Open Circuit Voltage (Voc/V) | 53.57 | 53.67 | 53.77 | 53.87 | 53.97 | 54.07 | 54.17 |
| Short Circuit Current (Isc/A) | 13.65 | 13.72 | 13.79 | 13.86 | 13.93 | 14 | 14.07 |
| Voltage at Maximum power (Vmpp/V) | 44.36 | 44.46 | 44.56 | 44.66 | 44.76 | 44.86 | 44.96 |
| Current at Maximum Power (Imp/A) | 12.97 | 13.05 | 13.13 | 13.22 | 13.3 | 13.38 | 13.46 |
| Module Efficiency(%) | 21.58 | 20.75 | 20.93 | 21.11 | 21.29 | 21.47 | 21.65 |
| 5% | Maximum power (Pmax/W) | 604 | 609 | 614 | 620 | 625 | 630 | 635 |
| Module Efficiency STC (%) | 21.60 | 21.79 | 21.97 | 22.16 | 22.35 | 22.54 | 22.73 | |
| 15% | Maximum power (Pmax/W) | 661 | 667 | 673 | 679 | 684 | 690 | 696 |
| Module Efficiency STC (%) | 23.66 | 23.86 | 24.07 | 24.27 | 24.48 | 24.68 | 24.89 | |
| 25% | Maximum power (Pmax/W) | 719 | 725 | 731 | 738 | 744 | 750 | 756 |
| Module Efficiency STC (%) | 25.71 | 25.94 | 26.16 | 26.38 | 26.61 | 26.83 | 27.05 |
PERC 660W 670W 680W Photovoltaic Panels
PERC (Passivated Emitter and Rear Cell) panels are an enhanced type of monocrystalline solar module that add a special passivation layer on the back of the solar cell. This layer reflects unused light back into the cell, allowing it to generate more electricity from the same sunlight. PERC technology improves efficiency (around 20–22%), delivers better performance in low-light and high-temperature conditions, and is widely used for both residential and commercial solar systems due to its balance of cost-effectiveness and reliability.
Advatnages
Wide Capacity Range – Available in 575 W to 605 W options, offering high output for both commercial and utility-scale projects.
Higher Conversion Efficiency – Mono PERC technology with 182 mm half-cut cells delivers efficiency up to 21.65%, ensuring greater energy generation per module.
Bifacial Options – Certain HiMAX models are available with bifacial designs, enabling additional power gain from the rear side and improving total system yield.
Improved Performance in All Conditions – Half-cut cell design enhances performance under low-light conditions and maintains stable output even in high-temperature climates.
Reduced Hotspot Risk – Lower operating current (~11 A) and optimized cell layout minimize hotspot formation, extending module lifespan and reliability.
Space Optimization – Compact design with higher wattage per panel makes them ideal for rooftop projects and areas with limited installation space, reducing overall system footprint.
Long-Term Reliability – Supported by Sunpal’s 25-year product warranty and 30-year linear power warranty for consistent performance.
| No. of Cells | 132 (6×22) |
| Dimensions | 2384 × 1303 × 35mm |
| Weight | 38.7kg |
| Junction Box | Ip68 rated (3 bypass diodes) |
| Packaging | 31pcs/pallet 558pcs/40’HQ |
| Module Type: SP685M-66H | 660 | 665 | 670 | 675 | 680 | 685 |
| Maximum power (Pmax/W) | 660 | 665 | 670 | 675 | 680 | 685 |
| Open Circuit Voltage (Voc/V) | 45.7 | 45.9 | 46.1 | 46.3 | 46.5 | 46.7 |
| Short Circuit Current (Isc/A) | 18.53 | 18.58 | 18.63 | 18.68 | 18.73 | 18.78 |
| Voltage at Maximum power (Vmpp/V) | 37.8 | 38 | 38.2 | 38.4 | 38.6 | 38.8 |
| Current at Maximum Power (Imp/A) | 17.47 | 17.5 | 17.54 | 17.58 | 17.62 | 17.66 |
| Module Efficiency(%) | 21.25 | 21.41 | 21.57 | 21.73 | 21.9 | 22.06 |
| MaxPmax/W | Vmp/V | Imp/A | Voc/V | Isc/A | Pmax gain |
| 704 | 38.2 | 18.43 | 46.1 | 19.56 | 5% |
| 717 | 38.2 | 19.29 | 46.2 | 20.49 | 10% |
| 737 | 38.2 | 20.18 | 46.3 | 21.42 | 15% |
| 804 | 38.2 | 21.05 | 46.4 | 22.36 | 20% |
| 838 | 38.2 | 21.94 | 46.5 | 23.29 | 25% |